sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
- SWITEK Robotic Arms for Injection Molding Machine Installation Instruction -- Chapter 1: Specification and Installation
- SWITEK Robotic Arms for Injection Molding Machine Installation Instruction -- Chapter 5: Operation
- SWITEK Robotic Arms for Injection Molding Machine Installation Instruction -- Chapter 14: Robot Maintenance Manual
- SWITEK Robotic Arms for Injection Molding Machine Installation Instruction -- Chapter 4: Operate Panel
- SWITEK Robotic Arms for Injection Molding Machine Installation Instruction -- Chapter 10: Wiring Diagram
Project Details
| # | Name | Value |
|---|---|---|
| 1 | Products Name | Spoon |
| 2 | Material | PP |
| 3 | Mould Cavities | 32 |
| 4 | Cycle Time | 10 |
| 5 | IML Robot | SW7112DS |
| 6 | IMM | 250 Ton |
| # | Name | Value |
|---|---|---|
| 1 | For IMM | 200 ~ 550 Ton |
| 2 | Traverse Stroke （Z） | 1650 mm |
| 3 | Vertical Stroke （Y） | 1200 |
| 4 | Cross Wise Stroke （X） | 720 |
| 5 | Drive | axis3hsp |
| 6 | Motor Power （X） | 750 W |
| 7 | Motor Power (Y) | 1000 W |
| 8 | Motor Power (Z) | 1000 W |
| 9 | Vacuum | 2 |
| 10 | Chuck Pipe | 2 |
| 11 | In Mould Time | 0.8 s |
| 12 | MAX Line Speed | X:3 Y:3.5 Z:4 |
| 13 | Dry Cycle Time | 3.3 s |
| 14 | 3 | |
| 15 | Power Input | AC220V/1P |
| 16 | Working Pressure | 5~7 kgf/cm2 |
| 17 | Air Consumption | 2 NL/Cycle |
| 18 | Payload | 5 kg |
| 19 | Net Weight | 370 kg |
| 20 | Gross Weight | 400 |
| 21 | Dimension | L 2710 mm |
| W 1434 mm | ||
| H 1780 mm |
| # | Name | Value |
|---|---|---|
| 1 | X1 | 950 mm |
| 2 | X2 | 720 mm |
| 3 | X3 | 0 mm |
| 4 | X4 | 0 mm |
| 5 | Y | 1200 mm |
| 6 | YM1 | 425 mm |
| 7 | YM2 | 775 mm |
| 8 | W | 1434 mm |
| 9 | L | 2710 mm |
| 10 | H | 1780 mm |
| 11 | Hs | 360 mm |
Why So Many Cutlery Producers Will Choose a Submarine Gate Cold Runner Mold for Their Cutlery Auto-packing Solutions?
Plastic (PP + CA/PLA) cutlery of different size are widely used around the world with a booming demand of "Takeout" food in a fast-paced life nowadays. And as an easy to produce products more and more plastic factory owners joint this business. But for the new producers of cutlery, how to make your investment rewardable?
To producce a plastic cutlery (Knife, Forks and Spoon) the producer will need an injeciton molding machine, the mold and the automation system. For the automation system it could be a robot only for manually packing or robot + auto-packing system for a cutlery auto-packing system. For the mold the cutlery can either choose a hot runner mold or a cold runner mold. But more and more producer will choose a submarine gate cold runner mold, why?
The most important is the cost advantage of a submarine gate cold runner mold against a hot runner one. As a low value added products most of the cutlery producing system are low budget project, and reduction of the investment means an increase of the profit in the future.
For more ideas about a cutlery auto-packing solution please contact Adams from SWITEK to get a turn-key solution of cutlery packing.
