sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
Robot Specification
| # | Name | Value |
|---|---|---|
| 1 | Model No.： | SW6712DS-20 |
| 2 | For IMM： | 200~550 Ton |
| 3 | Payload： | 8 kg |
| 4 | Dry Cycle Time： | 7 s |
| 5 | Height： | 2050 mm |
| # | Name | Value |
|---|---|---|
| 1 | X1 | 1025 mm |
| 2 | X2 | 840 mm |
| 3 | X3 | 0 mm |
| 4 | X4 | 0 mm |
| 5 | Y | 1200 mm |
| 6 | Z | 2000 mm |
| 7 | YM1 | 475 mm |
| 8 | YM2 | 725 mm |
| 9 | W | 1610 mm |
| 10 | L | 3020 mm |
| 11 | H | 2050 mm |
| 12 | Hs | 620 mm |
| # | Name | Value |
|---|---|---|
| 1 | For IMM | 200 ~ 550 Ton |
| 2 | Traverse Stroke （Z） | 2000 mm |
| 3 | Vertical Stroke （Y） | 1200 |
| 4 | Cross Wise Stroke （X） | 840 |
| 5 | Drive | axis3t |
| 6 | Motor Power （X） | 400 W |
| 7 | Motor Power (Y) | 750 W |
| 8 | Motor Power (Z) | 750 W |
| 9 | Vacuum | 2 |
| 10 | Chuck Pipe | 2 |
| 11 | In Mould Time | 3 s |
| 12 | MAX Line Speed | X:2.5 Y:2 Z:2 |
| 13 | Dry Cycle Time | 7 s |
| 14 | Power （KVA） | 2.5 |
| 15 | Power Input | AC220V/1PH |
| 16 | Working Pressure | 5~7 kgf/cm2 |
| 17 | Air Consumption | 3.5 NL/Cycle |
| 18 | Payload | 8 kg |
| 19 | Net Weight | 520 kg |
| 20 | Gross Weight | 550 |
| 21 | Dimension | L 3020 mm |
| W 1610 mm | ||
| H 2050 mm |
Application
Email: sales06@switek.biz
Turn-key Top Entry IML Solutions
SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.
The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.
The tips for a top entry IML solutions:
- To ensure that the robot has sufficient payload, it's the core of a stable IML system
- To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
- A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.
IML Solutions News & Express
- New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
- SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
- SWITEK New 4 cavities rectangular box with temper evidence side entry 5 faces IML solutions finished the in house testing before delivery.
- SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
- SWITEK is In House Testing of Top Entry IML System for 20L Paint Buckets
- SWITEK New 4 Cavities IML Solutions for Cheese Box Well Started for IML Production
- SWITEK New Turn-key 2 Cavities Box IML Solution Finished In House Testing
- SWITEK Finished the In House Testing of Juice Extractor Cover Top Entry IML System
- SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
- Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
