sales06@switek.biz
+86 186 5927 5869
Robot Specification
| # | Name | Value |
|---|---|---|
| 1 | Model No.： | SW6308-20 |
| 2 | For IMM： | 50~250 Ton |
| 3 | Payload： | 3 kg |
| 4 | Dry Cycle Time： | 6 s |
| 5 | Height： | 1690 mm |
| # | Name | Value |
|---|---|---|
| 1 | X1 | 980 mm |
| 2 | X2 | 640 mm |
| 3 | X3 | 165 mm |
| 4 | X4 | 645 mm |
| 5 | Y | 800 mm |
| 6 | Z | 1280 mm |
| 7 | YM1 | 235 mm |
| 8 | YM2 | 565 mm |
| 9 | W | 1500 mm |
| 10 | L | 2320 mm |
| 11 | H | 1690 mm |
| 12 | Hs | 380 mm |
| # | Name | Value |
|---|---|---|
| 1 | For IMM | 50 ~ 250 Ton |
| 2 | Traverse Stroke （Z） | 1280 mm |
| 3 | Vertical Stroke （Y） | 800 |
| 4 | Cross Wise Stroke （X） | 640 |
| 5 | Drive | Axis5 |
| 6 | Motor Power （X） | 400 W |
| 7 | Motor Power (Y) | 400 W |
| 8 | Motor Power (Z) | 400 W |
| 9 | Vacuum | 2 |
| 10 | Chuck Pipe | 2 |
| 11 | In Mould Time | 2 s |
| 12 | MAX Line Speed | X:2.3 Y:2 Z:2 |
| 13 | Dry Cycle Time | 6 s |
| 14 | Power （KVA） | 2.5 |
| 15 | Power Input | AC220V/1P |
| 16 | Working Pressure | 5-7 kgf/cm2 |
| 17 | Air Consumption | 3 NL/Cycle |
| 18 | Payload | 3 kg |
| 19 | Net Weight | 390 kg |
| 20 | Gross Weight | 420 |
| 21 | Dimension | L 2320 mm |
| W 1500 mm | ||
| H 1690 mm |
Application
Request for Quotation Now
Email: sales06@switek.biz
Turn-key Top Entry IML Solutions
SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.
The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.
The tips for a top entry IML solutions:
- To ensure that the robot has sufficient payload, it's the core of a stable IML system
- To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
- A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.
IML Solutions News & Express
- SWITEK New Cups Carton Loading System is Ready for Delivery
- SWITEK New Turn-key 2 Cavities Box IML Solution Finished In House Testing
- What Would be the Reaction of a First-Timers Who is Visiting NPE 2024 for the First Time
- New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
- SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
- SWITEK New IML System for Bucket with Handle Assembly Started Up for Bulk Production
- SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
- SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
- SWITEK is In House Testing of New 4 Cavities 250ml Cups Side Entry IML Robot
- SWITEK New 4 Cavities Rectangular Box Side Entry IML System Started Up for Production in India
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
