Air Cooling Compressed Air Freeze Dryer -- Global Distributors Wanted

#	Parameters	Unit	Value
1	Input Air Temperature	°C	2 ~ 80°C
2	Dew Point	°C	2 ~ 10°C
3	Cooling Type		Water-Cooling
4	Chill Water Pressure	MPa	0.2~0.4Mpa
5	Air In Pressure	MPa	0.4 ~ 1.0MPa
6	Pressure Loss	P	≤ 5% P
7	Chill Water Temperature	°C	2 ~ 35°C
8	Chill Water Quality		Industrial circulating soft water
9	Working Condition		Air In Temperature 65°C, Air In Pressure 0.7MPa(G)
10	Drying Capacity	m³/min	13
11	Refrigeration Power	kW	1.97
12	Water Consumption	t/h	3.8
13	Dimension	V (mm)	1250
W (mm)	650
H (mm)	1165
14	Net Weight	kg	205
15	Pipe Diameter	Air	Rp2
(Inch)	Chill Water	R1
16	Power In	V	AC220V/50Hz

Parameters

Unit

Value

Input Air Temperature

°C

2 ~ 80°C

Dew Point

°C

2 ~ 10°C

Cooling Type

Water-Cooling

Chill Water Pressure

MPa

0.2~0.4Mpa

Air In Pressure

MPa

0.4 ~ 1.0MPa

Pressure Loss

≤ 5% P

Chill Water Temperature

°C

2 ~ 35°C

Chill Water Quality

Industrial circulating soft water

Working Condition

Air In Temperature 65°C, Air In Pressure 0.7MPa(G)

Drying Capacity

m³/min

Refrigeration Power

1.97

Water Consumption

t/h

3.8

Dimension

V (mm)

1250

W (mm)

650

H (mm)

1165

Net Weight

205

Pipe Diameter

Air

Rp2

(Inch)

Chill Water

Power In

AC220V/50Hz

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Turn-key IML Solutions

6 Cavities yoghurt cups side entry IML Solutions

4 Cavities Butter Box Side Entry IML Solutions with Zhafir All Electric Injection Molding Machine

SWITEK IML Solutions 12 Cavities Lids Side Entry IML Solutions

20L Paint Bucket Side Entry IML Solutions.

SWITEK IML Robot 2 Cavities 1.5L Pails IML Solutions With Handle Assembly

CFKW-90NH

Request for Quotation Now

Turn-key IML Solutions