Air Cooling Compressed Air Freeze Dryer -- Global Distributors Wanted

#	Parameters	Unit	Value
1	Input Air Temperature	°C	2 ~ 45°C
2	Dew Point	°C	2 ~ 10°C
3	Cooling Type		Water-Cooling
4	Chill Water Pressure	MPa	0.2~0.4Mpa
5	Air In Pressure	MPa	0.4 ~ 1.0MPa
6	Pressure Loss	P	≤ 3% P
7	Chill Water Temperature	°C	2 ~ 45°C
8	Chill Water Quality		Industrial circulating soft water
9	Working Condition		Air In Temperature 38°C, Air In Pressure 0.7MPa(G)
10	Drying Capacity	m³/min	410
11	Refrigeration Power	kW	73.5
12	Water Consumption	t/h	69.5
13	Dimension	V (mm)	4100
W (mm)	2000
H (mm)	2520
14	Net Weight	kg	4900
15	Pipe Diameter	Air	DN300
(Inch)	Chill Water	DN100
16	Power In	V	AC380V/50Hz

Parameters

Unit

Value

Input Air Temperature

°C

2 ~ 45°C

Dew Point

°C

2 ~ 10°C

Cooling Type

Water-Cooling

Chill Water Pressure

MPa

0.2~0.4Mpa

Air In Pressure

MPa

0.4 ~ 1.0MPa

Pressure Loss

≤ 3% P

Chill Water Temperature

°C

2 ~ 45°C

Chill Water Quality

Industrial circulating soft water

Working Condition

Air In Temperature 38°C, Air In Pressure 0.7MPa(G)

Drying Capacity

m³/min

410

Refrigeration Power

73.5

Water Consumption

t/h

69.5

Dimension

V (mm)

4100

W (mm)

2000

H (mm)

2520

Net Weight

4900

Pipe Diameter

Air

DN300

(Inch)

Chill Water

DN100

Power In

AC380V/50Hz

Turn-key 2 Cavities Side Entry IML System for Buckets with Handle Assembly

SWITEK new side entry IML solution for 2 cavities buckets IML production with handle assembly successfully started in the factory of our customer for bulk production.

The new system started up is the 9th IML system of the same for buckets with handle assembly. As the most economic IMl production solution for the buckets with handle, the system integrated the handle assembly unit to the IML robot to have the handle assembly immediately afte the buckets produced to increase the productivity of the system and reduce the label cost. With different size, it's possible to achieve a total cycle time of only 7s for a 2 cavities system of 1L bucket.

Although it's the most economic way to produce an IML bucket with a handle assembled, but it is not easy to have a stable and efficient system which will provide a continued production of the IML buckets. The key to a successful IML system for bucket with handle assembly is that the quality of the mold, a mold of precise injection and easy demoulding will ensure a free picking of the bucket and handles buy the robot and easy assembly, a high quality hot runner system is no doubt the cornerstone to a high quality mould.

Working with one of the leading thin-wall containers mould maker in China Mould-tip, SWITEK will provide clients around the world a turn-key IML solutions of 2 cavities IML buckets with handle assembly.

CFKW-2700N

Request for Quotation Now

Turn-key IML Solutions