Air Cooling Compressed Air Freeze Dryer -- Global Distributors Wanted

#	Parameters	Unit	Value
1	Input Air Temperature	°C	2 ~ 45°C
2	Dew Point	°C	2 ~ 10°C
3	Cooling Type		Water-Cooling
4	Chill Water Pressure	MPa	0.2~0.4Mpa
5	Air In Pressure	MPa	0.4 ~ 1.0MPa
6	Pressure Loss	P	≤ 3% P
7	Chill Water Temperature	°C	2 ~ 45°C
8	Chill Water Quality		Industrial circulating soft water
9	Working Condition		Air In Temperature 38°C, Air In Pressure 0.7MPa(G)
10	Drying Capacity	m³/min	260
11	Refrigeration Power	kW	44.1
12	Water Consumption	t/h	39.5
13	Dimension	V (mm)	3900
W (mm)	1750
H (mm)	2030
14	Net Weight	kg	3700
15	Pipe Diameter	Air	DN200
(Inch)	Chill Water	Rc3
16	Power In	V	AC380V/50Hz

Parameters

Unit

Value

Input Air Temperature

°C

2 ~ 45°C

Dew Point

°C

2 ~ 10°C

Cooling Type

Water-Cooling

Chill Water Pressure

MPa

0.2~0.4Mpa

Air In Pressure

MPa

0.4 ~ 1.0MPa

Pressure Loss

≤ 3% P

Chill Water Temperature

°C

2 ~ 45°C

Chill Water Quality

Industrial circulating soft water

Working Condition

Air In Temperature 38°C, Air In Pressure 0.7MPa(G)

Drying Capacity

m³/min

260

Refrigeration Power

44.1

Water Consumption

t/h

39.5

Dimension

V (mm)

3900

W (mm)

1750

H (mm)

2030

Net Weight

3700

Pipe Diameter

Air

DN200

(Inch)

Chill Water

Rc3

Power In

AC380V/50Hz

2 Cavities Bucket Side Entry IML Solutions with Handle Assembly

SWITEK new 2 cavities side entry IML system for 10L buckets IML production with handle assembly is approaching the finish of the structure assembly for in house testing before delivery.

The new robot is a custom made one for the 850T Zhafir full electric injection molding machine for the production of 2 cavities of 10L bucket with a special mold which will have the buckets and the handles packed in the same mold. For an IML bucket with handle, the solution of a mold with the buckets and handles integrated is the most economic solution for the IML bucket production.

For an IML project planning of handle buckets, the key point is the mold design and the IML system. Since the first system delivered on 2021 to Russia, SWITEK has now delivered more than 10 IML system of 2 cavities buckets with handle assembly from 1L to 10L buckets and working stablly. And the one on show Chinaplas 2024 with Yizumi is the fastest of 1L buckets 2 cavities IML solutions with handle assembly with a total cycle time of only 7s. As a productive system, the investor of the IML buckets producer is expected to earn his investment back in around 10 months. It's a real bargain, isn't it?

CFKW-1800N

Request for Quotation Now

Turn-key IML Solutions