Air Cooling Compressed Air Freeze Dryer -- Global Distributors Wanted

#	Parameters	Unit	Value
1	Input Air Temperature	°C	2 ~ 45°C
2	Dew Point	°C	2 ~ 10°C
3	Cooling Type		Water-Cooling
4	Chill Water Pressure	MPa	0.2~0.4Mpa
5	Air In Pressure	MPa	0.4 ~ 1.0MPa
6	Pressure Loss	P	≤ 3% P
7	Chill Water Temperature	°C	2 ~ 45°C
8	Chill Water Quality		Industrial circulating soft water
9	Working Condition		Air In Temperature 38°C, Air In Pressure 0.7MPa(G)
10	Drying Capacity	m³/min	190
11	Refrigeration Power	kW	33.08
12	Water Consumption	t/h	28.5
13	Dimension	V (mm)	3000
W (mm)	1450
H (mm)	1865
14	Net Weight	kg	3100
15	Pipe Diameter	Air	DN200
(Inch)	Chill Water	Rc2-1/2
16	Power In	V	AC380V/50Hz

Parameters

Unit

Value

Input Air Temperature

°C

2 ~ 45°C

Dew Point

°C

2 ~ 10°C

Cooling Type

Water-Cooling

Chill Water Pressure

MPa

0.2~0.4Mpa

Air In Pressure

MPa

0.4 ~ 1.0MPa

Pressure Loss

≤ 3% P

Chill Water Temperature

°C

2 ~ 45°C

Chill Water Quality

Industrial circulating soft water

Working Condition

Air In Temperature 38°C, Air In Pressure 0.7MPa(G)

Drying Capacity

m³/min

190

Refrigeration Power

33.08

Water Consumption

t/h

28.5

Dimension

V (mm)

3000

W (mm)

1450

H (mm)

1865

Net Weight

3100

Pipe Diameter

Air

DN200

(Inch)

Chill Water

Rc2-1/2

Power In

AC380V/50Hz

SWITEK High Speed 3 Axis Servo Injection Robot

SWITEK New 12 cavities flapping take away drink cups's lids picking and pressing system started up for production with the SWITEK high speed 3 axis servo injection robot SW7112DS as the picking robot.

The new designed lids for take away cups has a flapping cover to have the straw holes of the lids covered up to prevent the leakage of the drinks during delivery. It's now a very popular design among the big brands like Burger King, Starbucks. The function of the newly installed system is to pick the lids out and have flapping cover well bressed and stacked on the conveyor for packing.

Picked by SWITEK 3 axis servo high speed injection robot, the total cycle time would be around 6.5~7s depends on the injection cycle. The injection molding machine in the vidoe is Aotai 420T high speed injection molding machine, the counter part of it would be Haitian MA450F, Yizumi PAC430K3, HMD 428M8-SPV, JINYING 410T high speed injection molding machine for a 12 cavities solutions.

CFKW-1200N

Request for Quotation Now

Turn-key IML Solutions