Air Cooling Compressed Air Freeze Dryer -- Global Distributors Wanted

#	Parameters	Unit	Value
1	Input Air Temperature	°C	2 ~ 45°C
2	Dew Point	°C	2 ~ 10°C
3	Pressure Loss	P	≤ 3% P
4	Ambient Temperature	°C	2 ~ 40°C
5	Air In Pressure	MPa	0.4 ~ 1.0MPa
6	Cooling Type		Air-Cooling
7	Working Condition		Air In Temperature 38°C, Air In Pressure 0.7MPa(G)
8	Drying Capacity	m³/min	190
9	Refrigeration Power	kW	33.08
10	Fan Power	W	3200
11	Dimension	V (mm)	3200
W (mm)	1600
H (mm)	2300
12	Net Weight	kg	2455
13	Air Pipe Diameter	Inch	DN200
14	Power In	V	AC380V/50Hz

Parameters

Unit

Value

Input Air Temperature

°C

2 ~ 45°C

Dew Point

°C

2 ~ 10°C

Pressure Loss

≤ 3% P

Ambient Temperature

°C

2 ~ 40°C

Air In Pressure

MPa

0.4 ~ 1.0MPa

Cooling Type

Air-Cooling

Working Condition

Air In Temperature 38°C, Air In Pressure 0.7MPa(G)

Drying Capacity

m³/min

190

Refrigeration Power

33.08

Fan Power

3200

Dimension

V (mm)

3200

W (mm)

1600

H (mm)

2300

Net Weight

2455

Air Pipe Diameter

Inch

DN200

Power In

AC380V/50Hz

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Turn-key IML Solutions

SWITEK IML Robot 12 Cavities Lids IML Solutions With Lids Assembly

350/400ml Yogurt Cups Side Entry IML Solutions 7.5s

4 Cavities buckets side entry IML Solutions

6 Cavities yoghurt cups side entry IML Solutions.

4 Labels Fruit Buckets Side Entry IML Solutions

CFKA-1200N

Request for Quotation Now

Turn-key IML Solutions