Permanent Magnetic Screw Industrial Air Compressor -- Made in China

#	Parameters	Unit	Value
1	F.A.D/Max Pressure	M³	45.2/0.7
Min	43.1/0.8
MPa	39.3/1.0
2	Ambient Temperature	°C	-5°C ~ +45°C
3	Cooling Mode		Air-Cooling
4	Discharge Temperature	°C	Ambient Temperature + 15°C
5	Lubricant Oil	Liter	150
6	Noise	Db	88±2
7	Driven Mode		Direct Drive
8	Voltage		380V/50Hz/3Ph
9	Power	KW	250
10	Start Mode		Variable Frequency Start
11	Dimension	L (mm)	3600
W (mm)	2100
H (mm)	2280
12	Net Weight	kg	3800
13	Outlet Pipe Diameter	Inch	DN100

Parameters

Unit

Value

F.A.D/Max Pressure

M³

45.2/0.7

Min

43.1/0.8

MPa

39.3/1.0

Ambient Temperature

°C

-5°C ~ +45°C

Cooling Mode

Air-Cooling

Discharge Temperature

°C

Ambient Temperature + 15°C

Lubricant Oil

Liter

150

Noise

88±2

Driven Mode

Direct Drive

Voltage

380V/50Hz/3Ph

Power

250

Start Mode

Variable Frequency Start

Dimension

L (mm)

3600

W (mm)

2100

H (mm)

2280

Net Weight

3800

Outlet Pipe Diameter

Inch

DN100

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

EHD-VPM250

PM VSD Screw Air Compressor with Centrifugal Fan

Turn-key IML Solutions

Request for Quotation Now