Permanent Magnetic Screw Industrial Air Compressor -- Made in China

#	Parameters	Unit	Value
1	F.A.D/Max Pressure	M³	3.0/0.8
Min	2.7/1.0
MPa	2.1/1.2
2	Ambient Temperature	°C	-5°C ~ + 45°C
3	Cooling Mode		Air - Cooling
4	Discharge Temperature	°C	Ambient Temperature + 15°C
5	Lubricant Oil	Liter	16
6	Noise	Db	66±2
7	Driven Mode		Permanent Magnet Synchronous
8	Voltage		380V/50Hz/3Ph
9	Power	KW	18.5
10	Start Mode		Variable Frequency Start
11	Dimension	L (mm)	1300
W (mm)	930
H (mm)	1360
12	Net Weight	kg	291
13	Outlet Pipe Diameter	Inch	Rp1

Parameters

Unit

Value

F.A.D/Max Pressure

M³

3.0/0.8

Min

2.7/1.0

MPa

2.1/1.2

Ambient Temperature

°C

-5°C ~ + 45°C

Cooling Mode

Air - Cooling

Discharge Temperature

°C

Ambient Temperature + 15°C

Lubricant Oil

Liter

Noise

66±2

Driven Mode

Permanent Magnet Synchronous

Voltage

380V/50Hz/3Ph

Power

18.5

Start Mode

Variable Frequency Start

Dimension

L (mm)

1300

W (mm)

930

H (mm)

1360

Net Weight

291

Outlet Pipe Diameter

Inch

Rp1

Turn-key 2 Cavities Side Entry IML System for Buckets with Handle Assembly

SWITEK new side entry IML solution for 2 cavities buckets IML production with handle assembly successfully started in the factory of our customer for bulk production.

The new system started up is the 9th IML system of the same for buckets with handle assembly. As the most economic IMl production solution for the buckets with handle, the system integrated the handle assembly unit to the IML robot to have the handle assembly immediately afte the buckets produced to increase the productivity of the system and reduce the label cost. With different size, it's possible to achieve a total cycle time of only 7s for a 2 cavities system of 1L bucket.

Although it's the most economic way to produce an IML bucket with a handle assembled, but it is not easy to have a stable and efficient system which will provide a continued production of the IML buckets. The key to a successful IML system for bucket with handle assembly is that the quality of the mold, a mold of precise injection and easy demoulding will ensure a free picking of the bucket and handles buy the robot and easy assembly, a high quality hot runner system is no doubt the cornerstone to a high quality mould.

Working with one of the leading thin-wall containers mould maker in China Mould-tip, SWITEK will provide clients around the world a turn-key IML solutions of 2 cavities IML buckets with handle assembly.

EHD-VPM18D5

PM VSD Screw Air Compressor with Centrifugal Fan

Turn-key IML Solutions

Request for Quotation Now