sales06@switek.biz
+86 186 5927 5869
# | Parameters | Unit | Value |
---|---|---|---|
1 | F.A.D/Max Pressure | M3 | 9.7/0.8 |
Min | 7.8/1.0 | ||
MPa | 6.5/1.2 | ||
2 | Ambient Temperature | °C | -5° ~ +45°C |
3 | Cooling Mode | Air-Cooling | |
4 | Discharge Temperature | °C | Ambient Temperature + 15°C |
5 | Lubricant Oil | Liter | 75 |
6 | Noise | Db | 74±2 |
7 | Driven Mode | Direct Drive | |
8 | Voltage | 380V/50Hz/3Ph | |
9 | Power | KW | 45 |
10 | Start Mode | Variable Frequency Start | |
11 | Dimension | L (mm) | 2180 |
W (mm) | 1390 | ||
H (mm) | 1660 | ||
12 | Net Weight | kg | 1800 |
13 | Outlet Pipe Diameter | Inch | Rp2 |
SWITEK engineer finished the installation of a 4 cavities magazine of box 5 faces labeling installed to an old IML robot and started up in Chile.
The new installation service of our engineer in Chile is for the upgrading of the IML system which our clients have for a new market with the minimum investment by only replace the magazine and EOAT to switch the IML system from the production of one container to the other. With onsite installation and maintenance service from SWITEK, our clients will get a renewed IML system of efficient and stable.
As one of leading IML solutions provider growing up from the fast changing Chinese market, SWITEK engineers will always have "upgradable" ideal as the guideline of an IML system because our clients are challenging in a fast changing market, which means that they're allowed to upgrade their system immediately to provide their customer a new package. Designed under this mechanism, the SW8 series of IML robot if one of the best choice for small and medium sized producers of IML containers.
Email: sales06@switek.biz
IML Technology Express
SWITEK new 2 cavities rectangular boxes 5 faces IML labeling top entry IML system installed for production.
SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
SWITEK is In House Testing of Top Entry IML System for 20L Paint Buckets
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
SWITEK New Side Entry IML Robot for 55L IML Dustbin is Ready for In House Testing
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SWITEK Automation New Icecream Cups Lids Auto-production Put in Use
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China