Industrial Chiller -- Made in China

YJ-8W

Water Cooling Industrial Chiller

#	Name	Unit	Value
1	Model #:		YJ-8W
2	Refrigeration	Btu/h	77502
		KW	22.7
		Kcal/h	19522
3	Power Input		AC380V-415V/3PHASE/50HZ
4	Compressor	KW	5.5
5	Control Type		Capillary Tube
6	Cold Media		R22
7	Condenser		Shell and Coil Condenser
8	Cooling Water Flow	L/Min	80
9	Cooling Water Pipe Diameter	DN	40/1.5"
10	Evaperator	Type	Water Tank Type/Shell and Coil Evaporimeter
11	Water Tank Volumn	L	180
12	Water Pump	Hp	1
13	Chill Water Flow	L/Min	120
14	Chill Water Pipe Diameter	DN	40/1.5"
15	Net Weight	kg	220
16	Dimension	mm	L: 1300 x W: 700 x H: 1310

Request for Quotation Now

Email: sales06@switek.biz

WeChat

Features of SWITEK Water Cooling Chiller

High quality compressors and water pumps, safe, quiet, energy saving and durable.
Smart thermostat with a temperature control range from 5° ~ 25°, with touch screen for parameters setting, easy operating.
High-efficiency finned condenser and low-noise axial fan, better heat transfer effect and faster heat dissipation.
The larger volumn shell-and-tube evaporator has a better cooling capacity for a higher temperature working environment.
High input tolerance SMPs with overloading protection, over heating protection and anti-frozen protection to ensure the safety of the chiller.
Built-in 304 stainless steel insulation water tank, durable and easy to clean.
All pipes are insulated to prevent a inter-circulation among the pipes.
With built-in Reversed phase, lost phase and frozen protection to ensure the safety of the water cooling chiller.
The ultra-low temperature of the water cooling chiller is possible to lower the temperature to < -15°.

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.