Industrial Chiller -- Made in China

sales06@switek.biz

+86 186 5927 5869

YJ-20W

Water Cooling Industrial Chiller

#	Name	Unit	Value
1	Model #:		YJ-20W
2	Refrigeration	Btu/h	221923
		KW	65
		Kcal/h	55900
3	Power Input		AC380V-415V/3PHASE/50HZ
4	Compressor	KW	17.6
5	Control Type		Capillary Tube
6	Cold Media		R22
7	Condenser		Shell and Coil Condenser
8	Cooling Water Flow	L/Min	230
9	Cooling Water Pipe Diameter	DN	65/2.5"
10	Evaperator	Type	Water Tank Type/Shell and Coil Evaporimeter
11	Water Tank Volumn	L	420
12	Water Pump	Hp	3
13	Chill Water Flow	L/Min	300
14	Chill Water Pipe Diameter	DN	50/2"
15	Net Weight	kg	650
16	Dimension	mm	L: 1800 x W: 800 x H: 1550

Request for Quotation Now

Email: sales06@switek.biz

WeChat

Features of SWITEK Water Cooling Chiller

High quality compressors and water pumps, safe, quiet, energy saving and durable.
Smart thermostat with a temperature control range from 5° ~ 25°, with touch screen for parameters setting, easy operating.
High-efficiency finned condenser and low-noise axial fan, better heat transfer effect and faster heat dissipation.
The larger volumn shell-and-tube evaporator has a better cooling capacity for a higher temperature working environment.
High input tolerance SMPs with overloading protection, over heating protection and anti-frozen protection to ensure the safety of the chiller.
Built-in 304 stainless steel insulation water tank, durable and easy to clean.
All pipes are insulated to prevent a inter-circulation among the pipes.
With built-in Reversed phase, lost phase and frozen protection to ensure the safety of the water cooling chiller.
The ultra-low temperature of the water cooling chiller is possible to lower the temperature to < -15°.

SWITEK Automation 3 axis servo injection robot 16 Cavities elbow PVC pipe fittings runner cutting system put in production.

SWITEK 3 axis servo injection robot 16 cavities elbow PVC pipe fittings runner cutting system is an economic solution for the auto-production of PVC pipe fittings of small size around 25mm. The system has a 3 axis injection robot to pick the pipe fittings out and have the runner cutted and seperated automatically. It's one of the most widely used automation solutions for small PVC pipe fittings production in LESSO Group.