Alarm 52: T/O action zone is abnormal(X axis)

In take-out side zone, when the arm is under a state of decline, the M-arm's front and back axis has a tendency to move beyond the zone.

Solutions:

Please check the instruction program and the X axis moving setting value.
Please check the setting value of the X axis movable zone.

在取出侧区域，手臂在下降状态下，正臂前后轴有超出区域

处理方式:

请检查教导程序中X轴移动值
请检查X轴可动区域设定值

Tips: This alarm code and solutions is SWITEK SW8 series of side entry IML robot which include the SW830/SW831 for lids; SW832 for IML Containers; SW833 for lids and small size IML containers; SW850 for deep cavities containers like 20/33L paint buckets IML productions; SW860 for custom made IML solutions for special products etc.

2 Cavities Sweat Box 5 Faces Labeling Side Entry IML Solution

SWITEK engineer finished the installation of a 4 cavities magazine of box 5 faces labeling installed to an old IML robot and started up in Chile.

The new installation service of our engineer in Chile is for the upgrading of the IML system which our clients have for a new market with the minimum investment by only replace the magazine and EOAT to switch the IML system from the production of one container to the other. With onsite installation and maintenance service from SWITEK, our clients will get a renewed IML system of efficient and stable.

As one of leading IML solutions provider growing up from the fast changing Chinese market, SWITEK engineers will always have "upgradable" ideal as the guideline of an IML system because our clients are challenging in a fast changing market, which means that they're allowed to upgrade their system immediately to provide their customer a new package. Designed under this mechanism, the SW8 series of IML robot if one of the best choice for small and medium sized producers of IML containers.

SWITEK SW8 Series Side Entry IML Robot Alarm Code and Solutions

Turn-key IML Solutions

Request for Quotation Now