Alarm 48: Mould outside standby abnormal

Mode [outside standby] has been selected, while Y axis moves out of range, there is no mould open over signal

Solutions:

Check whether the mode [outside standby] has been selected.
Check whether mould open over signal X46 is ON or not.

选择了模外待机模式，但Z轴在置物侧以外位置移动时，无开模完信号

处理方式:

检查模式中是否选择了[模外待机]模式
检查开模完X46信号是否为ON

Tips: This alarm code and solutions is SWITEK SW8 series of side entry IML robot which include the SW830/SW831 for lids; SW832 for IML Containers; SW833 for lids and small size IML containers; SW850 for deep cavities containers like 20/33L paint buckets IML productions; SW860 for custom made IML solutions for special products etc.

6 Cavities Cups Side Entry IML Solutions

SWITEK new 6 cavities 250ml cups with metallic label is ready for the bulk production of the shinning cups for the branded beverage stores in Thailand.

Different from the other IML system which will have the label static charged by the mandril with static pins built inside, the new 6 cavities cups side entry IML system has an extra static charging ring installed to the robot just outside the mold. It's because of the label for the cups are metallic labels, which is positive to the static and must be static charged from the outside of the label to ensure the metallic labels are well charged.

With shinning looking, a beverage cup with metallic label will help to high light the image of the brand and differ the products from the other competitors. For sure it will help to attract the attention of the consumers especially the kids and young girls.

For more solutions of IML please feel free to contact Adams from SWITEK, for a price smart turn-key IML Solutions.

SWITEK SW8 Series Side Entry IML Robot Alarm Code and Solutions

Turn-key IML Solutions

Request for Quotation Now