Alarm 46: mid- plate signal is missing

Already has the mould open over signal, but the mid-plate signal is not ON

Solutions:

please confirmthe mode status of【mid-plate detection not in use】, if there is no mid- plate detection signal,please put this mode to ON, if there is a mid -plate detection, please confirm the sensor position and wiring,in addition, the setting time of time T50 should also be reasonably set. (there is mould unloading over signal, but after a period of T50 time,if there is still no mid- plate signal, the alarm will be given off)

已经有了开模完信号，但中板信号没有ON

处理方式:

请确认【中板检测不使用】模式状态，如果没有中板检测信号，请将此模式置ON，如果有中板检测，请确认传感器位置及接线，另外时间 T50的设定时间也请合理设定。（有开模完信号，但经过T50的时间仍然没有中板信号时，会警报）

Tips: This alarm code and solutions is SWITEK SW8 series of side entry IML robot which include the SW830/SW831 for lids; SW832 for IML Containers; SW833 for lids and small size IML containers; SW850 for deep cavities containers like 20/33L paint buckets IML productions; SW860 for custom made IML solutions for special products etc.

SWITEK High Speed IML Robot

SWITEK New 4 cavities rectangular box with temper evidence side entry 5 faces IML solutions finished the in house testing before delivery.

The 5 faces labeled IML rectangular box with temper evidence is a popular package designed for the cheese, which has two volumns 250g and 500g for Indian Market, but in China a similar container is for biscuits. As an IML container with temper evidence, it's a perfect package for different foods by simply change the label design.

For a success 5 face labeling IML projects, the key is to have a perfect mold flow design. Since the flowing distance of the plastic in mould is different along the long side and the short side of the container, it'll have to do something to make the flowing of the plastic faster alone the long side to avoid an overflow of the plastic on the label.

Anyway, for a new IML container producer, the best is to have a turn-key IML soluton of which to have the mold and IML robot well tested before delivery to have all the problem solved before. In this case thee system buyer will receive an IML system of ready to work.

For more information about an IML project please contact Adams from SWITEK Automation, who would be your personal consultant of IML system integration.

SWITEK SW8 Series Side Entry IML Robot Alarm Code and Solutions

Turn-key IML Solutions

Request for Quotation Now