Alarm 36: Product suction 1 Cfm is not OFF

SWITEK SW8 Series Side Entry IML Robot Alarm Code and Solutions

Alarm 36: Product suction 1 Cfm is not OFF

Product suction 1 Cfm is not OFF

Solutions:

Please confirm the suction 1 output (Y08) and sensor (X23)

警报36：成品吸1检知未OFF

成品吸1检知未OFF

处理方式:

请检查吸1输出(Y08)及吸1检知(X23)

Tips: This alarm code and solutions is SWITEK SW8 series of side entry IML robot which include the SW830/SW831 for lids; SW832 for IML Containers; SW833 for lids and small size IML containers; SW850 for deep cavities containers like 20/33L paint buckets IML productions; SW860 for custom made IML solutions for special products etc.

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.