Alarm 16: S-arm rising limit(X07) is not OFF

sales06@switek.biz

+86 186 5927 5869

Subscribe to Us

SWITEK SW8 Series Side Entry IML Robot Alarm Code and Solutions

Alarm 16: S-arm rising limit(X07) is not OFF

After the decline signal is sent, the S-arm rising signal is not OFF for a long time

Solutions:

please check timer T57
Please check rising limit sensors (x07) and S-arm going down valve And confirm the wiring

警报16：置臂位信号(X07)没有OFF

发出下降信号后，置臂上位信号长时间没有OFF

处理方式:

请检查计时器T57
请检查上升限位传感器(X07)及置臂下降阀，并确认配线

Tips: This alarm code and solutions is SWITEK SW8 series of side entry IML robot which include the SW830/SW831 for lids; SW832 for IML Containers; SW833 for lids and small size IML containers; SW850 for deep cavities containers like 20/33L paint buckets IML productions; SW860 for custom made IML solutions for special products etc.

SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put In USE.

As one of the Pipe Fittings Injection Automation Solutions custom made for LESSO Group, SWITEK 4 cavities pipe strap in mould insertion solution is a solution for the insert of small nuts in the production of pipe straps. The system include the function of nuts sorting, positioning, parts picking and runner cutting to produce the pipe straps automatically.

As the partner and supplier of Automation Solutions for the pipe fittings production since 2014, SWITEK have acquired rich experience in the design and integration of automation solutions for pipe fittings of PVC/PPR of different type.