sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| # | 參數 | 組織 | 參數值 |
|---|---|---|---|
| 1 | F.A.D/最大壓強 | M3 | 5.0/0.8 |
| Min | 4.5/1.0 | ||
| MPa | 3.6/1.2 | ||
| 2 | 環境溫度 | °C | -5°C ~ +45°C |
| 3 | 冷卻管道 | Air - Cooling | |
| 4 | 排氣溫度 | °C | Ambient Temperature + 15°C |
| 5 | 潤滑油 | 昇 | 22 |
| 6 | 譟音 | Db | 72±2 |
| 7 | 驅動管道 | Permanent Magnet Synchronous | |
| 8 | 電壓 | 380V/50Hz/3Ph | |
| 9 | 功耗 | KW | 30 |
| 10 | 啟動管道 | Variable Frequency Start | |
| 11 | 外形尺寸n | L (mm) | 1440 |
| W (mm) | 980 | ||
| H (mm) | 1540 | ||
| 12 | 淨重 | kg | 324 |
| 13 | 輸出管徑 | 英寸 | Rp1-1/2 |
橡塑企業要聞
SWITEK New Turn-key 2 Cavities Box IML Solution Finished In House Testing
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
SWITEK Engineer Finished the Installation of New Magazines in Chile
SWITEK Team Is Well Prepared for the Opening of InterPlast 2026 in Brazil
SWITEK new 2 cavities rectangular boxes 5 faces IML labeling top entry IML system installed for production.
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
SWITEK Automation 3 axis servo injection robot 16 Cavities elbow PVC pipe fittings runner cutting system put in production.
Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
SWITEK is In House Testing of Top Entry IML System for 20L Paint Buckets
聯系博主
sales06@switek.biz
+86 186 5927 5869
中國廣東省東莞市
注塑自動化解決方案
