About the Golden Eagle High Speed Injection Molding Machine GEK338W/GS
The GEKW/GS series of injection molding machine is the high speed injection molding machine produced by ZheJiang Golden Eagle Plastic Machinery Co., Ltd. for the high speed of the thin-wall containers with/without IML labeling. And the GEK338W/GS is an injection molding machine of the series with a clamping force of 3380kN and injection rate up to 600g/s, which is an ideal injection molding machine for the production of thin-wall IML containers with height <130mm.
The Specification of Golden Eagle GEK338W/GS
| Name | Unit | Value | ||||||
|---|---|---|---|---|---|---|---|---|
| Screw Diameter | mm | 52 | ||||||
| Theoretical Shot Volume | cm3 | 551 | ||||||
| Injection Weight (PP) | g | 397 | ||||||
| Injection Pressure | Mpa | 166 | ||||||
| Plasticizing Capacity | g/s | 42 | ||||||
| Injecdtion Rate | g/s | 600 | ||||||
| Clamping Force | kN | 3380 | ||||||
| Mold Stroke | mm | 540 | ||||||
| Space Between Tie Bars | mm | 625 x 615 | ||||||
| MAX.Mold Thickness | mm | 620 | ||||||
| MIN. Mold Thickness | mm | 250 | ||||||
| Ejector Force | kN | 62 | ||||||
| No. of Ejector | pcs | 9 | ||||||
| MAX. Pump Pressure | Mpa | 16 | ||||||
| Pump Motor Power | KW | 44+31 | ||||||
| Heater Power | KW | 29.5 | ||||||
| Machine Dimension | m | 7.0 x 1.8 x 2.3 | ||||||
| Net Weight | t | 12.7 | ||||||
Mold Platen -- GEK338W/GS
IML Solutions Recommendation -- 6 Cavities 1L Pails IML Production
The "Fruit Bucket" is now very popular among the youngsters now in China which have a variety of slice fruit filled in a 1L buckets with handle with tea or juice and other ingredients to be carried easily. It's one of the "Must Order" products in nearly all the "Beverage Tea" store in China. Which make the production of the IML buckets a money making business and GEK338W/GS is suitable for an IML system of 6 cavities 1L bucket high speed production.
The video on show is the in-production site of the 6 cavities 1L IML buckets with SWITEK SW8 series high speed side entry IML robot with a cycle time around 10s. With such a productivity, the factory owner has 5 staffs to do the bucket handle assembly and buckets packing.
To reduce the cost of man hours the optional solution of the same products would be an IML system with handle assemly, of which the IML robot will have the handle assembled to the IML bucket as soon as the bucket picked out. An ideal configuration of the system is a 2+2 layout of the buckets and with the injection molding done by a Golden Eagel high speed injection molding machine GEK338W/GS.
